Equipment and Design
- Cabins with double door on one side
- Cabin painted in one color (RAL System; excl. metallic and special effects)
- Roof, doors, sub-floor, etc., uniform black paint finish (RAL 9005)
- Windows grey 133 (polycarbonate)
- ALTRO rubber flooring
- Inner roof uniform paint finish
- Electrical automatic door operator
- Triple flip-out window, mountain- and valley side
- Handrails in standing area near doors
- Seats and backrest with fabric cover
- Rigid mounted seats
- Cabin step for station level walk in
- Cabin guidance towerside
- Rubber bumps on each corner column
- Cabin key for access to electrical automatic door operator
- Cleaning kit
The modern, matched internal and external design gives the cabin a futuristic feel. A wide range of equipment options are available thanks to the modular design.
Sport equipment transport
TWISTIN Ski Rack
The TWISTIN ski rack is a combined, automatically rotating and clamping bracket inside the cabin for the transport of skis. It allows transporting one pair of skis per passenger and makes an efficient entry and exit possible, while also offering a constant seating comfort. A simple, screwed cover (optional) allows the rack to quickly disappear. The cabin dimensions (length) change if this option is selected.
This Ski-Clip specially developed by CWA, is suitable for different cabin models and can be installed as a modular construction. The installation and removal is simple and quick. The arrangement in the roof impairs the convenient comfort in no way.
Ski protection railing
The ski protection railings are primarily to protect the glazing from scratching by ski tips. The attached rubber ring prevent the skis from falling over, thus preventing damage to the interior of the cabin.
Fabric cover (standard seats)
The fabric cover is part of the basic equipment. It can be choosen out of 2 assortments with diffrent colors.
Fabric cover with light cushion
The textile cover of the folding seat and backrest are equipped with a light cushion. The cushion provides a soft and comfortable seating, has an additional insulating function which recommends this option to colder regions. All colors as shown in the basic equipment are possible.
Upholstered seats and backrests add comfort and convenience to the cabin. The upholstery is available in water-repellent synthetic leather in different colours.
Seats with an integrated heating are upholstered and covered with synthetic leather (available in different colours). The material is water-repellent and very easy to maintain. The heated cushion ensure a warm and pleasant feeling in the gondola and can be replaced separately.
Installations at the station (such as power rails) are not included in the CWA delivery.
In warmer regions, these wooden seats provide a pleasant travelling experience. The material is environmentally friendly, weather resistant and very durable and robust. The maintenance-free seats lend your cabin a wonderful, timeless design.
The convincing, timeless design stands out above all in public transport. The passengers quickly feel good thanks to the comfortable seating. This seating variant also offers the highest comfort in the summer and in humid, tropical regions. The colour and the arrangement can be determined individually and be matched to the cabin design.
Folding middle seat
The folding middle seat is perfect for cabins that have to be converted into material transportation cabins. The whole seat can be folded away and gives space for two euro-pallets. There is enough space around to convenient place the load with a forklift.
The LED emergency lighting consists of two LED spots mounted to the inner roof in the door area to illuminate the cabin interior.
Indirect lighting in the interior roof
Indirect illumination with LED strips on the sides of the interior roof can provide a discreet illumination of the interior of the cabin. Thanks to electronically adjustable colour changes, the room climate can be individually adjusted to your needs.
To improve the optical appearance of your cabin, LED strips can be fitted to the inner edge of the glazing. The colour spectrum is wide. We will match the colours to your wishes and requirements.
Paintwork and foils
This high-quality finish with a changing optical appearance will give your cabin a very special and luxurious look. Countless colour variations are available. The appearance of your cabin will change according to the incident light.
Coloured polycarbonate window
In addition to the standard glazing in grey 133, polycarbonate window panes are also available in five additional colour variants (transparent, bronze 130, blue 113, grey 215, orange 710,).
The material is just as UV-resistant as the standard glazing.
The window panes are finished on both sides and made more scratch-resistant by means of a special process. The window panes become less vulnerable and can be more easily cleaned without leaving a trace.
Laminated safety glass is resounding retardant and provides low risk of injury from splinters over a simple flat sheet of glass. It has a significantly higher sound insulation. Even after partial destruction of the glass does have a protective effect, because the opening in the event of damage remains closed and falling off of shards is avoided.
The laminated safety glazing is glued to the outside of the cabin and is finished off with a dot matrix.
However, the VSG glazing has a substantial influence on the cabin weight.
VSG glass floor
A laminated safety glass floor broadens the outlook for the passengers and thereby creates a unique ride. A scratch-protection foil is applied to the floor as protection, and can be quickly and easily replaced. A VSG glass floor has an impact on the cabin weight and must be discussed in detail.
Transportation packaging (shrink foil)
In order to ensure optimum protection from possible damage during transportation and/or contamination, the cabin is shrink-wrapped in a 0.2 mm thick PE-Coax flat film. The foil can be completely removed quickly from the cabin.
An individual configuration of infotainment components is the best way to comply with different requirements.
The possibilities vary from audio systems to permanent video surveillance.
Here a list of possible infotainment equipment.Here a list of possible infotainment equipment.
- screen for Video entertainment
- audio system
- integrated computer
- permanent Video surveillance
- communication between cabins and control room
- messaging with WLAN
- content management from control room
- emergency call button inside the cabin
Current information on attractions, events and special offers, as well as music and movies can be played for passenger entertainment thanks to a complex multimedia system in each cabin. AUDIO and VIDEO components can be combined and be used separately. The electrical power supply must be defined in advance.
We are happy to work with you on your individual infotainment system.
We are happy to work with you on your individual infotainment system.
Emergency communication between the passengers and the operator is possible for an operator by means of an intercom, with which every cabin can be individually addressed. The system contains an integrated power supply and is supplied as a turnkey radio unit. An emergency button on the unit activates all the emergency components (camera, light, emergency power, etc.)
By means of an announcement system, it is possible to speak to each cabin from the station, and to provide instructions in case of an emergency.
Power supply by SuperCaps
Depending on the consumption and the route used, or if several cabins have to be supplied with electricity, we would recommend a power supply using SuperCaps.
The SuperCaps developed and patented by CWA deliver a constant power supply. They are recharged via a charging rail in the station every time the cabin runs through (charging cycle 10 - 20 s). There is a 12/24 VDC circuit (via Powerbox). The SuperCaps have a capacity of 165 F (54 Wh) and ensure a 24 h operation. In the case of a power failure, the elements that are relevant for an emergency situation (camera, emergency light, intercom) remain in operation via UPS (battery).
Power supply by carriage wheel generator
The built-in wheels generators in the carriage system produce electrical energy during travel.
The energy that is produced on the vehicle during travel can provide for instance infotainment systems, lighting, seat heating and other consumers with permanent electricity.
Operator and/or sponsor logos can be individually attached to the window panes (mountain, valley and mast side).
The cleaning set is kept in a plastic box, and contains: two 500 ml bottles of power cleaner, a silicon oil pen, EASY-MOUNT (installation tool for pane mounting), a 500 ml spray bottle, a micro-fibre cloth and a pair of cleaning gloves.